kabob
08-13-2005, 02:52 PM
Heres whats in the box.....
efi runners [polished]
new style plenum ['94]
new style Thottle body['94]
Thermostat housing
Thermostat
EFI water tubes
AFM
intake tube (cut to fit my application)
egr is seperate (I have block off plates)
egr modulator (again I removed this out of the system so its sperate)
main engine wiring harness to ECU
All the senors
cold start injector
AC idle up valve
85 ECU
EFI Distibutor inclusing cap and rotor
(4) professionaly cleaned injectors (3000 miles)
injector resistor pack
fuel rail
Pressure regulator
fuel Surge valve
Fuel filter
New coil (1000 miles) and ignitor
I beleive this is everything you need expect the driver side wiring loom, under dash loom from the ECU to the Instrument Cluster with relays & Fuse box, Fuel pump, Air filter adapter.
Iam asking 200 for it but I will take offers. And I dont minding shipping. Buts its all or none
Thanks Josh
efi runners [polished]
new style plenum ['94]
new style Thottle body['94]
Thermostat housing
Thermostat
EFI water tubes
AFM
intake tube (cut to fit my application)
egr is seperate (I have block off plates)
egr modulator (again I removed this out of the system so its sperate)
main engine wiring harness to ECU
All the senors
cold start injector
AC idle up valve
85 ECU
EFI Distibutor inclusing cap and rotor
(4) professionaly cleaned injectors (3000 miles)
injector resistor pack
fuel rail
Pressure regulator
fuel Surge valve
Fuel filter
New coil (1000 miles) and ignitor
I beleive this is everything you need expect the driver side wiring loom, under dash loom from the ECU to the Instrument Cluster with relays & Fuse box, Fuel pump, Air filter adapter.
Iam asking 200 for it but I will take offers. And I dont minding shipping. Buts its all or none
Thanks Josh