Turbo 22RE Bell Housing

[MikeS]

Is the bell housing different on the 22RE Turbo than the standard 22RE? Is there a bell housing that will interchange from something else if they are?

Thanks in advance.

[illiand]

yes they are different; turbo trucks came with a different tranny than the NA trucks. what are you looking to do, somebody might be able to point you in the right direction with some more info...

[Oatmeal]

The turbo trucks came with an "R" series transmission (R151 with a 4.30(?) first gear) the bellhousings won't bolt to the "W" or "G" series transmissions found behind the injected and carburated (respectively) motors but, can be used to bolt a 20R,22R,22RE to a R150 V6 trans. The V6 bellhousing can also be bolted to the turbo trans and would be great for swapping a Tacoma 3.4 (since they used an R150 trans) into an earlier truck and keep the 23 spline gear drive T-case........or so I've been told ;) ..........Hans

[Jon Sullivan]

Don't mean to butt in on this theme, but since we are talking about bellhousings, does anybody know what an 85 diesel 2wd bellhousing will bolt on to. I was thinking of putting the diesel motor into a 4wd yota with maybe a blown gas engine. Antbody know if it would bolt up.

Jon

[illiand]

as to the diesel question i would check out www.toyotadieselmadness.com they have a very informative bulletin board dedicated to toyota oil burners

[hammerhead]

22s bellhousings are tranny specific like a Chev. Not like a Ford where the BH is engine specific.

Look here. This should help.

http://www.marlincrawler.com/trans.html