New Tech Article - 10-20 HP for under $95 (22RE)

[WildYoats]

I cleaned up a bunch of junk from my intake and wow, what a difference!

http://www.wildyoats.com/hp_under_$95.htm

[Harris]

how much time did this take? i also have a 4 banger with 125000 on it, i would love to try it out myself

[WildYoats]

About three hours of the labor, and what ever time Wally needed the injectors for the cleaning.

[k4kas]

I have begn to do this today.
All I have to do is find a place to send the injectors to.
My question is this,how can I clean the bottom of the runner without taking off of the head?
I have 145k on mine and I am suffering from the black goo!
Rough idle is what spawned me to look.

[k4kas]

Hello??????
No suggestions?:confused:

[ronniet]

I sent mine to cruzinperformance.com If I remember correctly it was around 60 buck and that included shipping back to me. Ron

[Bain]

i just took mine off and cleaned it..my gawd what a mess of black goo in there...runs so much smoother now:Thumbsup:

[xl4runner]

I cleaned mine about a month ago and the performance was super noticable.. the only problem that i ran into was that i idled higher due to the lager air flow, but that just took a twist of the idler screw:beer: The total time with a good pressure was and injector balancing was like 3 or 4hours and it is sooo worth it :beer:

[Bain]

Originally posted by xl4runner
I cleaned mine about a month ago and the performance was super noticable.. the only problem that i ran into was that i idled higher due to the lager air flow, but that just took a twist of the idler screw:beer: The total time with a good pressure was and injector balancing was like 3 or 4hours and it is sooo worth it :beer: yea, i had to turn my idle down about 2 rotations...runs so smooth:yes:

[toy4crawlin]

Injector Testing, Cleaning, Calibrating and Balancing in CA !

Sent mine to RC Engineering (http://www.rceng.com/)
24 Hour turn around ! with a Computer print out of before & After !
Now thats Service!
$25 each
small write of injectors from toy Customer
Injector wirte Up (http://www.4crawler.com/4x4/CheapTricks/EngineMods/index.shtml#Injectors)

Sent head to shop for clean, check and valves, Head Had a Hair line crack in #2
Compression was
150 in #1
120 in #2
138 in #3
135 in #4
I'm in the middle of doing my intake, finally just cleaned it completly last night.

After scraping, brushing, 30 hour soaking, spraying, and 6 cans of degressor and Carb cleaner, intake all shiny inside.

Can't wait to feel the difference.


??? Does Jacobs Ignition omni pak do ANY Goood ?????

Tnaks for posting HP tips

[88wildrunner]

how exactly do you clean the efi. do you jsut take it apart and wipe the inside down and spray degreaser on the inside of it? my runners got 176k on it.