inner wheel bearing

[toy4x4]

how do you get the inner wheel bearing out of the rotor/wheel hub thing.. thanks alot sry for all the stupid questions

[cruiseroutfit]

You have to remove the hub unit (take of the hub, spindle nuts, caliper, etc) and then remove the wheel seal with a seal puller (or hammer/screwdriver in a pinch)...

Then the bearing will fall right out... the race needs to be punched out from the opposite side...

:D

[Jeff S.]

I saw a tip that says to put one of the wheel bearing nuts back on the spindle and then pull the rotor off. The nut will keep the bearing and seal on the spindle and it won't damage the seal. Repack bearing and reinstall seal.

Jeff