KToy
06-09-2004, 08:05 AM
for starters my lift has a 3 inch body lift.
then for the rear i got 92 2wd 1/2 chevy leafs that are 63 inches long and they are moved down on the frame 9 inches and moved back on the frame 4 inches so that the axle is located in the same place as before. i got 10 inch shackles in the rear but are only 8 inches eye hole to eye hole.
for the front i got the stock rears up front and some add packs for durability.the stock 90 toyotas have an offset center fole for the center bolt. which moved my axle about 4 inches forward which i needed cuz i still tag my cab. as for leafs i got the stock 91 rears up front with a set of stock rears 85 under them with the front and rear eyes of the leafs cut off. and then since i had top move my leaves wider cuz of the d44 axle i had to build a plate off of the frame and welded a spring hanger to this plate. the spring hanger i used i bought at roclogic and it looks identical to the stock rear hanger its a got a flat top and a round sleeve with bushings in it. u can buy them at rocklogic but u got to buy square tubing and drill a hole in it and then cut it in half. ill try to get u a pic if i can
http://www.rocklogic4x4.com check under products and then do it yourself stuff and then go to the bushings assemblys and ull see exactly what i bought.
then in the front of the front springs i just build a drop hanger out of square tubing and the dimensions are 2.5 x 2.5 at 3/8 inch think metal.
its burley
any other questions let me know or any help id help out anyway i can
then for the rear i got 92 2wd 1/2 chevy leafs that are 63 inches long and they are moved down on the frame 9 inches and moved back on the frame 4 inches so that the axle is located in the same place as before. i got 10 inch shackles in the rear but are only 8 inches eye hole to eye hole.
for the front i got the stock rears up front and some add packs for durability.the stock 90 toyotas have an offset center fole for the center bolt. which moved my axle about 4 inches forward which i needed cuz i still tag my cab. as for leafs i got the stock 91 rears up front with a set of stock rears 85 under them with the front and rear eyes of the leafs cut off. and then since i had top move my leaves wider cuz of the d44 axle i had to build a plate off of the frame and welded a spring hanger to this plate. the spring hanger i used i bought at roclogic and it looks identical to the stock rear hanger its a got a flat top and a round sleeve with bushings in it. u can buy them at rocklogic but u got to buy square tubing and drill a hole in it and then cut it in half. ill try to get u a pic if i can
http://www.rocklogic4x4.com check under products and then do it yourself stuff and then go to the bushings assemblys and ull see exactly what i bought.
then in the front of the front springs i just build a drop hanger out of square tubing and the dimensions are 2.5 x 2.5 at 3/8 inch think metal.
its burley
any other questions let me know or any help id help out anyway i can