what u guys think

[yotaguy]

i just spent about 1800 dollars on my truck i got a front axle for sas all sas parts from allpro cuz im lazy and didnt want to fab them i got the hysteer from marlin and all pro 5 inch springs. good choice i hope and what size tires do you think i can fit with the 5 inch lift springs i have 33s right now and a 3 inch body i want to get rid of the body when i get the 5 inch springs so i was wondering if i could fit 35s or 36s with a little fender trimming? maybe well thanks for your help

[toykid]

hell you could fit 38's with that much lift, just start trimmin' fenders

[rcrvndl]

I've got the same springs and a 2" BL with no trimming and I've got 37's under mine. Once I get the front driveline installed I'll double check to make sure I'm really good. I think I have a couple of places to adjust.

I would leave the 3" BL and still install the new springs.

[YotaRunner]

I have about the same thing... IT'S WAY TALL! I want to drop 3" some were and go with 38's. I have all the room in the world for the 37's and no triming...

I drove from the house to the tire store with the old 33's I had, and it looked really stupid and was scary as hell to drive. I'd suggest going larger then 35's if you got the coin...

-Jerry-

[Bill Collins]

all-pro springs will settle or sag with hard use,i got the 5.5in.springs longer shackels and a drop hanger,axle moved foward 1in. and my 36in. tires rub pretty bad now.i got some new 37 swampers so i am gonna have to do some sheet metal work...

[AZWILDYOAT]

I'm doing the exact same thing right now. I plan on running 38" Swampers after the install.

[Flexor]

Originally posted by Bill Collins
all-pro springs will settle or sag with hard use,i got the 5.5in.springs longer shackels and a drop hanger,axle moved foward 1in. and my 36in. tires rub pretty bad now.i got some new 37 swampers so i am gonna have to do some sheet metal work... Cutting your firewall is about the next only way you'll get any more clearance. Its a time consumeing project, but makes a big difference for room for your tires to stuff.

[Ghetto]

I only have 3" springs in the front with 1 1/2" longer shackles. I rubbed really bad until I moved the front axle foward an 1 1/2" witha little sheet metal trimming I barely rub at all and I run 36's. I do not like body lifts. Just my .02.

[Rockcrawlintoy]

4-5 inch lift and 37 MT/Rs it might rub on the bed thats it tho

Drew

[twisty4runner]

a buddy of mine runs 38 sx's with the 5 inch springs and clears just fine. no BL either

[Bill Collins]

well i got the new 37 ssr's on and the front only needs a little work,but the rear needs a bunch.it does sag about 2 in.in the rear so i may weld a 1 in. pad on the perch and make some longer schakles to get it level.i took the springs off my truck and the runner is a lot more weight.but it will still need trimming on both ends...