jonesy5000
05-09-2003, 04:36 PM
I'm trying to install 1.5 spacers on my front shocks. I can't get the bottom of the shock to line up with the lower mount. I have been busting my tail all week (after work) and I have had to remove the spacers to get to work. I had help and we managed to get a screw driver through but not the bolt.
I loosened the upper control arm & lower control arm. Un bolted the sway bars and steering arm. Still no go. Also, I tried using a 4ft pipe to help compress the spring , (only one spring compressor would fit when the shock is mounted.)
Please advise. Thanks!
I loosened the upper control arm & lower control arm. Un bolted the sway bars and steering arm. Still no go. Also, I tried using a 4ft pipe to help compress the spring , (only one spring compressor would fit when the shock is mounted.)
Please advise. Thanks!