I have searched every where can someone please help

[brandon88]

Ok i just got done building my truck the problem is the wiring, First and for most is an 88 std pu SAS 22re, its be apart for about three months and my dumb ass for got to mark the wires and were the go. so off the main wiring harness i have i think its about ten wires or so and i basically just matched colors and fitment, but now i have two or three little ones that i can not locate were they go for the life of me, and i think i might have the infectors wired wrong also i dont know what order they should be in i just went with what looked right, so i can get it to start but it wont stay running or idle i can take it up to about 3000 and it sounds ok then it just dies can any body help please

[Loki]

Ok i just got done building my truck the problem is the wiring, First and for most is an 88 std pu SAS 22re, its be apart for about three months and my dumb ass for got to mark the wires and were the go. so off the main wiring harness i have i think its about ten wires or so and i basically just matched colors and fitment, but now i have two or three little ones that i can not locate were they go for the life of me, and i think i might have the infectors wired wrong also i dont know what order they should be in i just went with what looked right, so i can get it to start but it wont stay running or idle i can take it up to about 3000 and it sounds ok then it just dies can any body help please
i have the 85 FSM that should work for most of your wiring needs. i have an 88 22re SAS as well, and mine runs great, so if you have some questions, i can try to help out...pm me or post up some pictures of the wires and locations, plug number and i'll see what i can do. or if you pm me your email address, i can send the FSM if you have the email space available.

[brandon88]

I will try and get some pics, there are two wires I know for sure that I cant find on the block, from the harness one I s brown with two male connectors top to bottom and then a white single wire pigtail. I can not locate were these go from the harness. I'm assuming they are on the block but hell I just cant remember. And I think my idling issues is my injectors are wired wrong. but thanks for your help I will try to get some pictures up ASAP thanks again Loki. could you maybe email me the 85 FSM?




Brandon Pettit

[zig80toy]

pics would help a lot...
Did you swap in a new/rebuilt motor er something? I'm trying to figure out what you mean when you say "building my truck". Are we only concerned with wires under the hood?

[brandon88]

I took my motor out when I did my SAS, i had alot of other things i had to do so it was easier. But i'm an idiot and totally forgot to label the wires.

So now that I have it all put back together, I tried wiring it hoping i could just match plugs, so that is what i did, there are a few that were easy, But i think that I have the injectors wired wrong and i can not find were all wires go. there are couple smaller connectors that come off the harness that i can not locate were they go if any were. so that is my problem.

[Loki]

Brandon...shoot me a pm with your email address and i'll try to compress the file to send it. if not, i'll try to put it on my website tonight and send you a link.

[brandon88]

Thanks for your help

[4MOAB]

Where are you? My Runner's an '88 22RE. if you're in Utah, let's pop the hoods and use mine a a guide. Dave