22r carb hook up

[simplyxj]

Ok so, after a ton of problems in trying to switch to fule injection and learning that early 84's have a different block and head, I have decided I need to repair my old 22r harness (or buy a new one) and rehook the carb... My problem is, I was not planning on hooking the carb and old manifold back up when I removed it. So, I being the dummy I am, didn't pay attention to all of the hoses and connections of the old manifold! Where do I find some instructions/pics of how to do this? Also, who has a good 22r harness lying around they'd like to give/sell me? And, who wants to buy an EFI kit? Also anyone in Utah wanna come give me a hand?

[wrnchplr]

were at in utah??? I have a FSM that would help....

[simplyxj]

were at in utah??? I have a FSM that would help....

I'm in sandy... Yeah that FSM would help a TON! When are you available to lend a hand? I'll "cook" up some pizza... haha

[808derek]

in the haynes book it has some good pics of where the vacuum lines go i just had to do this yesterday anyway good luck

[simplyxj]

in the haynes book it has some good pics of where the vacuum lines go i just had to do this yesterday anyway good luck

Well thank you very much! I hadn't even checked the most simple of places yet then... How did yours go? Any advice?

[808derek]

mine came out good at first but just make sure all the lines have vacuum i had a week vacuum on my distributor so it ran like crap till i switched them, other then that you just kinna have to play with it and switch here and switch there it eventually works out anyway good luck

[simplyxj]

mine came out good at first but just make sure all the lines have vacuum i had a week vacuum on my distributor so it ran like crap till i switched them, other then that you just kinna have to play with it and switch here and switch there it eventually works out anyway good luck

Ok thanks man! do you have pics you could send me of the lines? simplydietcola@hotmail.com If not that's cool and thank you!

[808derek]

sorry man my camera has seen to much action if you know what i mean ok well take it ez

[simplyxj]

k well thanks for the advice...

[simplyxj]

Does anyone have multiple angle pics of their 22r carb hook up? Someone e-mailed me a factory map of it but there were a couple of things that were not clear to me on that because of the lack of angles...