going from 4.37s to 5.29s ( 33s to 36s )

[Tiggy]

Hello, on my truck i had 33 inch tires with 4.37 gears, i just upgraded and waiting tell tommarow to throw in my finished 3rd that has 5.29 gears in it , it also has welded spider gears, will i notice a difference between the two, i wana run 36 swampers with the 5,29s will it be lower then the 4.37s with 33s

[fourwd1]

Probably, 36's/5.29's is a good match, it should put you close to stock.
My truck has 36" TSL's and 5.29's and the speedo is dead on, which means my final drive ratio is equivalent to the stock 4.10/? tire size ratio.

[ZUK]

Hello, on my truck i had 33 inch tires with 4.37 gears, i just upgraded and waiting tell tommarow to throw in my finished 3rd that has 5.29 gears in it , it also has welded spider gears, will i notice a difference between the two, i wana run 36 swampers with the 5,29s will it be lower then the 4.37s with 33s

You'll like the combo....you have only a 20R and a 4 speed so 529 is about right. Now I notice in your sig you plan to upgrade to 38".....571 gears is a better choice for that in your case.
Bias ply Swampers are the best for offroad....air them down to 4 psi and kick ass.

[Tiggy]

im just gona stock with 36, who needs 38s with a yota!