PDA

View Full Version : E-Locker / 02 V6 4Runner 3rd / 84 4.10 3rds x2


usmcracing
04-10-2006, 08:49 AM
Taco e locker without the actuator/motor, has chewed up pinion. Comes with a new Downy Cable Actuator.
$375

2002 4Runner V6 3rd that is 99% new with about 300 miles on it. It was the wrong gear ratio from the factory and the Runner's owner noticed that the speedo was not correct. You can see the factory lash paint is still visable and it looks like NEW. Toyota part number 41110-3D550, ring gear is 41 teeth and pinion is 11 teeth which I think is 3.72.
$150

One pair of Stock 4.10 3rds out of a 84 Toyota pickup they are both is good shape and ran good when in truck. One has some surface rust on one side of the ring gear but will clean right off. The other I used in my Runner for a few weeks while my 3rd was been rebuilt.

$100 for that pair or $50 each

I can take pics if need.

Steven

nezsm76@yahoo.com

usmcracing
05-01-2006, 04:19 PM
TTT with new PRICES

85 toy
05-02-2006, 04:31 PM
is that elocker a rear or front locker and a low pinion also i take it.

usmcracing
05-02-2006, 05:50 PM
is that elocker a rear or front locker and a low pinion also i take it.

Its from the rear of a Tacoma. The only front Toyota e lockers were HIGH pinion and came in the FZJ80.

So where will I be shipping it too?


Steven

85 toy
05-02-2006, 06:14 PM
will the cable actuator work on a 85 short bed with the axle moved back 7 inches.

usmcracing
05-03-2006, 06:28 AM
Sale Pending on the E Locker