22RE Injectors

[nails]

I read somewhere that you can use the 12 ohm injectors with the 2.5 ohm computer, can anyone confirm this? Is anyone using this combo and how does it work?

[vigilantejustic]

Do you want more fuel flow?

If so, the guys at DOA racing used the RCengineering (http://www.rcengineering.com) injectors on their buildup.

"Bigger Injectors
More air flow requires more fuel, and a serious upgrade like a bigger turbo is going to require more fuel, potentially, than the stock 295 cc/minute injectors are capable of providing.

I elected to go with RC Engineering's 320 cc/minute Lucas-style injectors. Now, if I were also changing the stock air flow sensor to a better (i.e., less restrictive) setup, like a MAP sensor or a Karman Vortex unit, I could go with even bigger injectors, but I wasn't, so I didn't (there are limits to my truck budget, and this was one of them...) Still, the new injectors flowed significantly more fuel than the stock injectors, and required some serious tweaking of the MAF. I'll flesh this out into a separate topic in the future, but for the moment, let me just say that this was a good and necessary addition.

Total cost for 4 new injectors: $368
"